发布日期：2021年11月29日

SINGLE DEGREE OF FREEDOM SYSTEMS (SDOF) - VIBRATION CALCULATOR

**The Single Degree of Freedom (SDOF) Vibration Calculator** to calculate mass-spring-damper natural frequency, circular frequency, damping factor, Q factor, critical damping, damped natural frequency and transmissibility for a harmonic input.

Mechanical vibrations are fluctuations of a mechanical or a structural system about an equilibrium position. Mechanical vibrations are initiated when an inertia element is displaced from its equilibrium position due to energy input to the system through an external source. When work is done on SDOF system and mass is displaced from its equilibrium position, potential energy is developed in the spring.

A restoring force or moment pulls the element back toward equilibrium and this cause conversion of potential energy to kinetic energy. In the absence of nonconservative forces, this conversion of energy is continuous, causing the mass to oscillate about its equilibrium position.

All structures have many degrees of freedom, which means they have more than one independent direction in which to vibrate and many masses that can vibrate. Single degree of freedom systems are the simplest systems to study basics of mechanical vibrations. SDOF systems are often used as a very crude approximation for a generally much more complex system. The other use of SDOF system is to describe complex systems motion with collections of several SDOF systems.

INPUT PARAMETERS | ||||

Parameter | Value | |||

Mass [m] | ||||

Spring rate (Stiffness) [k] | ||||

Damping raito (coefficient) [ζ] | --- | |||

Free-Forced vibration | ||||

Harmonic input frequency [Ω] | Hz | |||

Note: Use dot "." as decimal separator.

RESULTS | ||

Parameter | Value | |

Cicular frequency [w_{n}] | ---- | rad/s |

Natural frequency [f_{n}] | ---- | Hz |

Period of oscilattion [T] | ---- | s |

Critical damping [c_{c}] | ---- | --- |

Damping factor [c] | ---- | --- |

Damped natural angular frequency [w_{d}] | ---- | rad/s |

Damped natural frequency [f_{d}] | ---- | Hz |

Quality factor [Q] | ---- | --- |

Transmissiblity [TR] | ---- | --- |

**Transmissiblity vs Frequency Ratio Graph(log-log)**

**Critical damping:** The minimum amount of viscous damping that results in a displaced system returning to its original position without oscillation.

大陆国语自产精品视频在麻豆 大陆国语自产,餐桌下的乱h免费阅读_餐桌下的乱h最新章节, 死神之无间风死 死神之逐风者最新章节 免费阅读 同人 **Damped natural frequency:**In the presence of damping, the frequency at which the system vibrates when disturbed. Damped natural frequency is less than undamped natural frequency.

**Damping ratio:** The ratio of actual damping to critical damping. It is a dimensionless measure describing how oscillations in a system decay after a disturbance.

**Forced vibrations:** Oscillations about a system's equilibrium position in the presence of an external excitation.

**Free vibrations: **Oscillations about a system's equilibrium position in the absence of an external excitation.

**Natural frequency:** The frequency at which a system vibrates when set in free vibration.

**Undamped natural frequency:** In the absence of damping, the frequency at which the system vibrates when disturbed.

**Period of Oscillation:** The time in seconds required for one cycle.

**Transmissiblity:** The ratio of output amplitude to input amplitude at same frequency. Following 2 conditions have same transmissiblity value.

-- Transmissiblity between harmonic motion excitation from the base (input) and motion response of mass (output) Ex: Car runing on the road. Car body is m, base motion excitation is road disturbances.

-- Harmonic forcing excitation to mass (Input) and force transmitted to base (output). Ex: A rotating machine generating force during operation and transmitting to its base.

**Quality Factor:** Transmissibility at resonance, which is the system’s highest possible response ratio.

Parameter | Equation |

Natural angular frequency (w_{n})[rad/s] | $${ w }_{ n }=\sqrt { \frac { k }{ m }}$$ |

Natural frequency (f_{n}) [Hz] | $${ f }_{ n }=\frac { 1 }{ 2\pi } \sqrt { \frac { k }{ m } }$$ |

Period of oscillations (T) [s] | $$T=\frac { 1 }{ { f }_{ n } }$$ |

Critical damping (c_{c}) | $${ c }_{ c }=2m{ w }_{ n }$$ |

Damping factor (c) | $$c=\zeta { c }_{ c } $$ |

Damped natural frequency (w_{d}) | $${ w }_{ d }={ w }_{ n }\sqrt { 1-{ \zeta }^{ 2 } }$$ |

Quality factor (Q) | $$Q=\frac { 1 }{ 2\zeta }$$ |

Transmissibility (TR) | $$TR=\sqrt { \frac { 1+{ (\frac { 2\zeta \Omega }{ { w }_{ n } } ) }^{ 2 } }{ { [1-{ (\frac { \Omega }{ { w }_{ n } } ) }^{ 2 }] }^{ 2 }+{ (\frac { 2\zeta \Omega }{ { w }_{ n } } ) }^{ 2 } } }$$ |

k - Spring rate (stiffness), m - Mass of the object, ζ - Damping ratio, Ω - Forcing frequency

- Sarafin,T,P. (1995) . Spacecraft Structures and Mechanisms . 8th edition. Microcosm,Inc. and Kluwer Acedemic Publishers.
- Kelly,S.G. (2000). Fundamentals of Mechanical Vibrations.2nd edition.McGraw-Hill

About us | Contact us | Disclaimer | Privacy Policy

Copyright © 2013-2020